NJ2211 E M 55x100x25mm Cylindrical Roller Bearing
Due to the cylindrical rollers, the cylindrical roller bearing NJ2211-E-M has large contact surfaces between rolling elements and bearing rings. It is suitable for high radial loads and high speeds.
Features
-
suitable for high radial load capacities and high speeds
-
wider than series 2 and suitable for slightly higher loads
-
Variant NJ: semi- locating bearing, axially displaceable in one direction
-
cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
Technical Data
Inside Ø (mm):
55
Outside Ø (mm):
100
Width (mm):
25
Tolerance for inside-Ø (mm):
0/-0,015
Tolerance for outside-Ø (mm):
0/-0,015
Tolerance for width (mm):
0/-0,15
Design:
NJ
Ring Material:
Rolling bearing steel
Rolling Element Material:
Rolling bearing steel
Cage Material:
Brass
- suitable for high radial load capacities and high speeds
- wider than series 2 and suitable for slightly higher loads
- Variant NJ: semi- locating bearing, axially displaceable in one direction
- cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
| Inside Ø (mm): | 55 |
| Outside Ø (mm): | 100 |
| Width (mm): | 25 |
| Tolerance for inside-Ø (mm): | 0/-0,015 |
| Tolerance for outside-Ø (mm): | 0/-0,015 |
| Tolerance for width (mm): | 0/-0,15 |
| Design: | NJ |
| Ring Material: | Rolling bearing steel |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Brass |
Inquiry Form
