NA6906 open Needle Roller Bearing with Inner Ring
The needle bearing NA6906 has thin cylinders as rolling elements and can absorb very high radial forces with its massive bearing rings. It is suitable for space-saving installation.
Features
-
it consists of a machined massive outer ring with rib, a needle roller and cage assembly and a separable inner ring
-
suitable for high radial load capacities
-
wider than needle roller bearings of the series 49 and therefore suitable for significantly higher radial loads
-
seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
-
can be used if the surface of the shaft is not suitable as a raceway
Technical Data
Inside Ø (mm):
30
Outside Ø (mm):
47
Width (mm):
30
Tolerance for inside-Ø (mm):
0/-0,01
Tolerance for outside-Ø (mm):
0/-0,011
Tolerance for width (mm):
0/-0,12
Seal:
open
Ring Material:
Rolling bearing steel
Inner Ring:
yes
Rolling Element Material:
Rolling bearing steel
Cage Material:
Sheet Steel
Rows of Rolling Elements:
single row
- it consists of a machined massive outer ring with rib, a needle roller and cage assembly and a separable inner ring
- suitable for high radial load capacities
- wider than needle roller bearings of the series 49 and therefore suitable for significantly higher radial loads
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- can be used if the surface of the shaft is not suitable as a raceway
| Inside Ø (mm): | 30 |
| Outside Ø (mm): | 47 |
| Width (mm): | 30 |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Seal: | open |
| Ring Material: | Rolling bearing steel |
| Inner Ring: | yes |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Sheet Steel |
| Rows of Rolling Elements: | single row |
Inquiry Form
