23126 CC K (tapered) W33 Spherical Roller Bearing
With the swiveling inner ring, the spherical roller bearing 23126-CC-K-W33 offers excellent alignment error compensation. It has two rings with barrel-shaped rollers as rolling elements and can absorb very high radial and also axial forces.
Features
-
Spherical roller bearing with two rows of rollers
-
pivoting inner ring, misalignments and shaft deflections can be compensated
-
suitable für very high radial and relatively high axial loads in both directions
-
balanced ratio between radial load capacity, size and weight
-
with tapered bore for mounting by means of adapter sleeve
-
cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
-
seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
130
Outside Ø (mm):
210
Width (mm):
64
Tolerance for inside-Ø (mm):
0/-0,025
Tolerance for outside-Ø (mm):
0/-0,03
Tolerance for width (mm):
0/-0,25
Ring Material:
Rolling bearing steel
Bore:
tapered (K)
Cage Material:
Sheet Steel
Rolling Element Material:
Rolling bearing steel
- Spherical roller bearing with two rows of rollers
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable für very high radial and relatively high axial loads in both directions
- balanced ratio between radial load capacity, size and weight
- with tapered bore for mounting by means of adapter sleeve
- cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
- seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 130 |
| Outside Ø (mm): | 210 |
| Width (mm): | 64 |
| Tolerance for inside-Ø (mm): | 0/-0,025 |
| Tolerance for outside-Ø (mm): | 0/-0,03 |
| Tolerance for width (mm): | 0/-0,25 |
| Ring Material: | Rolling bearing steel |
| Bore: | tapered (K) |
| Cage Material: | Sheet Steel |
| Rolling Element Material: | Rolling bearing steel |
Inquiry Form
