23038 CA W33 Spherical Roller Bearing
With the swiveling inner ring, the spherical roller bearing 23038-CA-W33 offers excellent alignment error compensation. It has two rings with barrel-shaped rollers as rolling elements and can absorb very high radial and also axial forces.
Features
-
Spherical roller bearing with two rows of rollers
-
pivoting inner ring, misalignments and shaft deflections can be compensated
-
suitable für very high radial and relatively high axial loads in both directions
-
light series with small dimensions compared to inner diameter
-
cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
-
seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
190
Outside Ø (mm):
290
Width (mm):
75
Tolerance for inside-Ø (mm):
0/-0,03
Tolerance for outside-Ø (mm):
0/-0,035
Tolerance for width (mm):
0/-0,3
Bore:
cylindrical
Ring Material:
Rolling bearing steel
Rolling Element Material:
Rolling bearing steel
Cage Material:
Brass
- Spherical roller bearing with two rows of rollers
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable für very high radial and relatively high axial loads in both directions
- light series with small dimensions compared to inner diameter
- cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
- seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 190 |
| Outside Ø (mm): | 290 |
| Width (mm): | 75 |
| Tolerance for inside-Ø (mm): | 0/-0,03 |
| Tolerance for outside-Ø (mm): | 0/-0,035 |
| Tolerance for width (mm): | 0/-0,3 |
| Bore: | cylindrical |
| Ring Material: | Rolling bearing steel |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Brass |
Inquiry Form
