NUP2310 E 50x110x40mm Cylindrical Roller Bearing
Due to the cylindrical rollers, the cylindrical roller bearing NUP2310-E has large contact surfaces between rolling elements and bearing rings. It is suitable for extremely high radial loads and high speeds.
Features
-
suitable for extremely high radial load capacities, axial load capacities in one direction and high speeds
-
wider than series 3 and suitable for slightly higher loads
-
Variant NUP: Locating bearing, can be used as a locating bearing and supports both radial and axial loads
-
cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
Technical Data
Inside Ø (mm):
50
Outside Ø (mm):
110
Width (mm):
40
Tolerance for inside-Ø (mm):
0/-0,012
Tolerance for outside-Ø (mm):
0/-0,015
Tolerance for width (mm):
0/-0,12
Design:
NUP
Ring Material:
Rolling bearing steel
Rolling Element Material:
Rolling bearing steel
Cage Material:
Sheet Steel
- suitable for extremely high radial load capacities, axial load capacities in one direction and high speeds
- wider than series 3 and suitable for slightly higher loads
- Variant NUP: Locating bearing, can be used as a locating bearing and supports both radial and axial loads
- cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
| Inside Ø (mm): | 50 |
| Outside Ø (mm): | 110 |
| Width (mm): | 40 |
| Tolerance for inside-Ø (mm): | 0/-0,012 |
| Tolerance for outside-Ø (mm): | 0/-0,015 |
| Tolerance for width (mm): | 0/-0,12 |
| Design: | NUP |
| Ring Material: | Rolling bearing steel |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Sheet Steel |
Inquiry Form
