6206 2RS C3 Stainless Steel Deep Groove Ball Bearing
Stable and with good spinning characteristics. The stainless steel deep groove ball bearing SS-6206-2RS-C3 is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications and is resistant to corrosion.
Features
-
all components are made of stainless steel: the deep groove ball bearing is therefore corrosion resistant and hygienic
-
light series with compact dimensions and low weight
-
can carry relatively high radial loads despite low weight
-
suitable for high radial loads and light axial loads in both directions
-
offers high running accuracy and high speeds
-
seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
-
If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
-
with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
30
Outside Ø (mm):
62
Width (mm):
16
Tolerance for inside-Ø (mm):
0/-0,01
Tolerance for outside-Ø (mm):
0/-0,013
Tolerance for width (mm):
0/-0,12
Rows Of Balls:
single row
Ring Material:
Stainless Steel
Seal:
2RS
Internal Clearance:
C3 (Increased Internal Clearance)
Cage Material:
Stainless Steel
Flange:
no
Slot & Snap Ring:
no
Rolling Element Material:
Stainless Steel
Full Complement Ball Set:
no
- all components are made of stainless steel: the deep groove ball bearing is therefore corrosion resistant and hygienic
- light series with compact dimensions and low weight
- can carry relatively high radial loads despite low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy and high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 30 |
| Outside Ø (mm): | 62 |
| Width (mm): | 16 |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,013 |
| Tolerance for width (mm): | 0/-0,12 |
| Rows Of Balls: | single row |
| Ring Material: | Stainless Steel |
| Seal: | 2RS |
| Internal Clearance: | C3 (Increased Internal Clearance) |
| Cage Material: | Stainless Steel |
| Flange: | no |
| Slot & Snap Ring: | no |
| Rolling Element Material: | Stainless Steel |
| Full Complement Ball Set: | no |
Inquiry Form
