609 open dry 9x24x7mm Miniature Deep Groove Ball Bearing
For use in special conditions. The miniature ball bearing 609 is small and suitable for installation with limited space and on thin shafts. It can withstand very high speeds. Main dimensions according to DIN 625-1.
Features
-
miniature ball bearing with smallest dimensions
-
suitable for high radial loads and light axial loads in both directions
-
suitable for high running accuracy, quiet running and very high speeds
-
seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
9
Outside Ø (mm):
24
Width (mm):
7
Tolerance for inside-Ø (mm):
0/-0,008
Tolerance for outside-Ø (mm):
0/-0,009
Tolerance for width (mm):
0/-0,12
Rows Of Balls:
single row
Seal:
open
Internal Clearance:
CN (Standard)
Flange:
no
Slot & Snap Ring:
no
Ring Material:
Rolling bearing steel
Rolling Element Material:
Rolling bearing steel
Cage Material:
Sheet Steel
Full Complement Ball Set:
no
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy, quiet running and very high speeds
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 9 |
| Outside Ø (mm): | 24 |
| Width (mm): | 7 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Rows Of Balls: | single row |
| Seal: | open |
| Internal Clearance: | CN (Standard) |
| Flange: | no |
| Slot & Snap Ring: | no |
| Ring Material: | Rolling bearing steel |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Sheet Steel |
| Full Complement Ball Set: | no |
Inquiry Form
