604 ZZ Deep Groove Ball Bearing

604 ZZ Deep Groove Ball Bearing Double Shield 604-2Z 80015, 5mm x 14mm x 5mm High Carbon Steel Z1 Bearings

• Size: 604ZZ (Inner Dia.=5mm, Outer Dia.=14mm, Thickness=5mm)
• Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0) for most general use
• Same As 605ZZ / 605-2Z / 80015. Pre-Lubricated, Easy to maintain

NOTE:

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:

Model: 605ZZ
Shield Type: Double Shield
Material:High Carbon Steel
Heat Treatment:Quenching
Hardness: HRC50-55
Cage Material: Stamping Steel
Inner Diameter (d): 5mm
Outer Diameter (D): 14mm
Thickness (B): 5mm
Dynamic Load Rating (Cr): 1.3kN
Static Load Rating (Cor): 0.49kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1