6002 V (MAX) 2RS Deep Groove Ball Bearing
Lightweight, stable and resilient. The deep groove ball bearing 6002-V-2RS is a true all-rounder and, due to its balanced properties, it is suitable for a wide range of applications. With its full complement ball set design, it is particularly suitable for heavy loads. Due to the maximum number of rolling elements, it is marked with the addition MAX (= maximum).
Features
-
full complement ball system design: higher radial load capacity than comparable deep groove ball bearings with cage
-
high impact resistance and rigidity due to larger number of rolling elements
-
extra light series with compact dimensions and low weight
-
suitable for high radial loads and light axial loads in both directions
-
offers high running accuracy and quiet running
-
seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
-
If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
15
Outside Ø (mm):
32
Width (mm):
9
Tolerance for inside-Ø (mm):
0/-0,008
Tolerance for outside-Ø (mm):
0/-0,011
Tolerance for width (mm):
0/-0,12
Rows Of Balls:
single row
Seal:
2RS
Ring Material:
Rolling bearing steel
Flange:
no
Slot & Snap Ring:
no
Rolling Element Material:
Rolling bearing steel
Full Complement Ball Set:
yes
- full complement ball system design: higher radial load capacity than comparable deep groove ball bearings with cage
- high impact resistance and rigidity due to larger number of rolling elements
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy and quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 15 |
| Outside Ø (mm): | 32 |
| Width (mm): | 9 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Rows Of Balls: | single row |
| Seal: | 2RS |
| Ring Material: | Rolling bearing steel |
| Flange: | no |
| Slot & Snap Ring: | no |
| Rolling Element Material: | Rolling bearing steel |
| Full Complement Ball Set: | yes |
Inquiry Form
