4201 open TN oiled Double Row Deep Groove Ball Bearing
Double row design for higher load capacity. The double row deep groove ball bearing 4201-TN has a higher load capacity than comparable single row deep groove ball bearings, but is only slightly wider.
Features
-
double row design: significantly higher load capacity than comparable single row deep groove ball bearings; additionally, it can support tilting moments
-
narrower than two comparable single row deep groove ball bearings side by side
-
cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
-
light series with compact dimensions and low weight
-
suitable for very high radial loads and light axial loads in both directions
-
suitable for high running accuracy, quiet running and high speeds
-
seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
12
Outside Ø (mm):
32
Width (mm):
14
Tolerance for inside-Ø (mm):
0/-0,008
Tolerance for outside-Ø (mm):
0/-0,011
Tolerance for width (mm):
0/-0,12
Rows Of Balls:
double row
Seal:
open
Ring Material:
Rolling bearing steel
Internal Clearance:
CN (Standard)
Cage Material:
Plastic
Flange:
no
Slot & Snap Ring:
no
Rolling Element Material:
Rolling bearing steel
Full Complement Ball Set:
no
- double row design: significantly higher load capacity than comparable single row deep groove ball bearings; additionally, it can support tilting moments
- narrower than two comparable single row deep groove ball bearings side by side
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- light series with compact dimensions and low weight
- suitable for very high radial loads and light axial loads in both directions
- suitable for high running accuracy, quiet running and high speeds
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 12 |
| Outside Ø (mm): | 32 |
| Width (mm): | 14 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Rows Of Balls: | double row |
| Seal: | open |
| Ring Material: | Rolling bearing steel |
| Internal Clearance: | CN (Standard) |
| Cage Material: | Plastic |
| Flange: | no |
| Slot & Snap Ring: | no |
| Rolling Element Material: | Rolling bearing steel |
| Full Complement Ball Set: | no |
Inquiry Form
