22326 CA W33 Spherical Roller Bearing
With the swiveling inner ring, the spherical roller bearing 22326-CA-W33 offers excellent alignment error compensation. It has two rings with barrel-shaped rollers as rolling elements and can absorb very high radial and also axial forces.
Features
-
Spherical roller bearing with two rows of rollers
-
pivoting inner ring, misalignments and shaft deflections can be compensated
-
suitable für very high radial and relatively high axial loads in both directions
-
massive series with higher load capacity
-
considerably higher load capacity than spherical roller bearings of other series
-
cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
-
seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
-
good fixed bearing property, but can also be used as a floating bearing, each in both directions
Technical Data
Inside Ø (mm):
130
Outside Ø (mm):
280
Width (mm):
93
Tolerance for inside-Ø (mm):
0/-0,025
Tolerance for outside-Ø (mm):
0/-0,035
Tolerance for width (mm):
0/-0,25
Ring Material:
Rolling bearing steel
Bore:
cylindrical
Cage Material:
Brass
Rolling Element Material:
Rolling bearing steel
- Spherical roller bearing with two rows of rollers
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable für very high radial and relatively high axial loads in both directions
- massive series with higher load capacity
- considerably higher load capacity than spherical roller bearings of other series
- cage material: brass. Special strength and durability under extreme conditions such as shock loads and vibrations, high acceleration forces and lack of lubrication
- seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
| Inside Ø (mm): | 130 |
| Outside Ø (mm): | 280 |
| Width (mm): | 93 |
| Tolerance for inside-Ø (mm): | 0/-0,025 |
| Tolerance for outside-Ø (mm): | 0/-0,035 |
| Tolerance for width (mm): | 0/-0,25 |
| Ring Material: | Rolling bearing steel |
| Bore: | cylindrical |
| Cage Material: | Brass |
| Rolling Element Material: | Rolling bearing steel |
Inquiry Form
